Hey David,
The Curt Front Mount Trailer Hitch Receiver # 31108 comes with hardware and a diagram for models without tow hooks so you'll still be able to install it. view full answer...
Hey Jim,
The Curt Bolt On Tow Hook with Keeper # C22411 is a universal-fit so you can install them on your 2021 Ram 2500, you just might have to drill through the frame if there aren't appropriately sized holes available. view full answer...
Even if it could act as a recovery point, the Demco # DM9519338 does not fit the Trailhawk. I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-521451-5 instead assuming you don't have active air shutters. None of the base plate kits that fit can be used as a recovery point.
All of them require removing the front tow hooks. I do not have information on where you could relocate a hook for recovery so I recommend talking to the Jeep dealer or a mechanic to find a solution to mount... view full answer...
Thanks for reaching out, Dan!
The etrailer Invisible Base Plate Kit # e86YR will fit perfectly fine with the Tremor skid plate on your 2022 Ford F-150. The base plate will take the place of your tow hooks and while the Tremor package looks a little different, the tow hook locations are the same so you're good to go!
Attached is an installation video and a photo of this kit on a 2023 Ford F-150 for your reference.
For a complete flat towing setup you will need a base plate kit, tow bar,... view full answer...
Thanks for the picture of your new 2015 Jeep Wrangler Willys Vicky. I can see that it has an aftermarket bumper on it so the standard fits for the Willys versions aren't applicable. So what you are going to have to do is measure the D-rings on the bumper and go with the correct D-ring adapter for it like the part # RM-035 if the D-ring is 3/4 inch thick or part # RM-035-1 if they are 1 inch thick.
We don't have a way to determine what bumper you have from the picture that I can't attach... view full answer...
I checked with our manufacturers and there is one base plate that fits a 2018 Toyota 4Runner, the Roadmaster Crossbar-Style Base Plate Kit # 1185-1.
Your 4Runner must have tow hooks, and the base plate won't fit Limited or Nightshade Special Edition models, or models with Kinetic Dynamic Suspension. An accompanying tow bar that will work with these base plates is the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR. view full answer...
The B and W Tow N Stow adjustable ball mounts do not have a ay to add a pintle attachment if it didn't come with one but they do have versions of the ball mount that hat this attachment like with the part # BWTS20055 which fits a 2-1/2 inch hitch. view full answer...
To extend your 7-Way wiring connector we have the TorkLift Wiring Harness Extension for 42" SuperTruss or Cannon Hitch Extender # TLW6042 and you can secure it to your extender with the mounting bracket # PK12711U.
The safety chains are specifically designed for TorkLift extenders so you'll have to pick up a set like the 44" long Tow Ready Safety Chain Kit with Clevis Hooks # 49150 and modify them for your application for that part of your towing setup.
Attached are some review videos... view full answer...
The VueSMART is compatible with newer Chevy trucks, but the Chevy/GMC trailer wiring power is just a mess, and camera systems are hit or miss on them. They don't give the full power to the running lights and 12 volt which cause all kinds of issues. Generally, an adapter will do the trick, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera # FR87PR.
This gives the right level of power to the trailer wiring, and it should be the fix you need. I can't absolutely guarantee it... view full answer...
Go To Results